|
 
This high-build
reflective coating has excellent UV resistance and easily accommodates
the thermal movement of PU foam insulation.
Although DUROCOAT has been developed primarily for use with spray
applied polyurethane insulation, it can also be used for other
applications such as reflective and protective waterproof coating to
concrete, asphalt & bitumen, asbestos cement, slates and tiles,
zinc, timber surfaces etc.
 Highly
adhesive to PU foam
Absolutely
waterproof
Seamless,
tough & flexible finish
High
solar reflectivity & UV protection
Suitable
for a variety of roof substrates
Water
vapour permeable
GENERAL
1
DUROCOAT may be applied by brush, roller, squeegee or spray
equipment. The actual
method of application is selected depending on the circumstances of the
particular project.To spray, select a nozzle size of at least 0.028 in.,
first checking the spray equipment to ensure suitability.
2.
All surfaces to be coated must be clean, dry and free from dust,
dirt, oil, grease and other contaminants.
3.Apply in separate coats, each at right angles to the one before.
Using a different colour for each coat helps ensure consistency
of cover.
PRIMING
Pu Roofs. DUROCOAT is designed to adhere tenaciously to PU foam and in
general priming is not required. However,
for critical applications and glazed or plastic surfaces use DUROPRIME
to enhance bondability.
ACCESSIBLE
ROOFS
A separation layer of polythylene, Kraft paper or similar should be
placed on the DUROCOAT membrane before topping with sand cement screed
or tiles of 4 to 5cm thickness.
|
Brushes,
tools and other equipment should be cleaned with water whilst wet.
20 kg. metal pail.
Store in the
dry, away from direct sunlight, at temperatures above 5 dec. C and below
30 deg. C.
When stored in unopened containers expect a minimum shelf life of
one year.
White
& Grey
Generally
safe, non-toxic and non-flammable whilst wet.
However, avoid prolonged skin contact.
Use of cream, gloves is advisable.
If eyes are affected by DUROCOAT, rinse with copious amount of
clean water. If ingested, seek medical attention immediately.
Actual drying
time depends on climatic conditions and may vary from one hour to one
full day. Do not start work
if rain is forecasted for the subsequent 24 hours.
|
