 |
 |
 |
 |
 |
 |
 |
| Q1 | What are the advantages of using reinforced membranes over the other conventional systems ? | |
| Q2 | What are the
different types of reinforcements used in the membranes ? |
|
| Q3 | How
cost effective is it to use ? |
|
| Q4 | What is the maximum and minimum thickness in which it is available ? | |
| Q5 | Where all it
can be used ? |
|
| Q6 | On which all
substrates it can be applied ? |
|
| Q7 | How it is
applied ? |
|
| Q8 | Does it
requires any protection or not ? |
|
| Q9 | What is the
delivery time ? |
|
| Q10 | Whether undertakes projects on turnkey basis or not ? | |
| Q11 | Whether conform to any code or not ? | |
| Q12 | Whether it
conform to any standards or not ? |
|
| Q13 | What is life
and shelf life ? |
|
| Q14 | Does it conform to International standards? | |
| - | ||
| - | ||
| - | ||
| - | ||
| A1 | Good
elongation and recovery (60%).High tensile strength and tear resistance. Very good puncture resistance.Non-biodegradeable.Good heat resistivity. |
 |
| A2 | Polyester
fabric (non-woven / spun-bonded).Glass
fibre mat. |
|
| A3 | Though it seems to be costly as an initial investment; but proves to be economical in long run.You may consider it to be a one-time investment. | |
| A4 | Though
different categories of membranes are available in different thicknesses,
on an averagebasis we can say that the membranes are available in 3mm, 4mm, and 5mm. |
|
| A5 | Though
different category of membranes are recommended for different
application depending on the thickness of the membrane (that can be understood after
going through the individualproduct category); in general we may say that it is used for the
waterproofing of : Roofs Basements Swimming pools Multistory car parks Sunken areas |
|
| A6 | It
can be applied over : RCC Steel decks Wood planks Lumbers sheathing Plywood sheathing LWFC |
|
| A7 | It is applied using blowtorch over the cleaned, dry and primed surface | |
| A8 | If the roof is
accessible then it should be protected using cement screed, tiles or
mortar for blackfinish and for Sand / Granules finish doesn’t require any topping. |
|
| A9 | It takes around 6 to 8 weeks to deliver the product after getting the payment. | |
| A10 | Generally we don’t undertake projects on Turnkey basis but if the requirement is such that the order is turnkey basis then we can surely arrange for an applicator who is skilled to do the job. | |
| A11 | Till now there is no code for the membrane system. | |
| A12 | The membranes
conform to UEATc, ASTM & CGSB. |
|
| A13 | Life : For the
life of the membrane, if the membranes are applied properly and it is
not been punctured during the application process then the life is long. Membrane : 3-4 years Liquids : 1 year |
|
| A14 | It is ISO9002 certified. | |