|
SUNGARD is a fibred, cold applied, highly reflective decorative waterproofing asphalt base coating formulated with ductile bitumen, polished Aluminum flakes and fortified with fibers, mineral
stabilizers and additives. |
|
 
BITUMAT ALUGARD is an excellent protective coating for BUR, composition and modified bitumen roofs. Effective as waterproofing, preservative coating over aged bitumen roofs. ALUGARD is an effective
coating over metal roofs and over roof flashing details
Aluminum
roof coating can reduce the roof temperature by as much as 10 °C;
which means that ALUGARD not only protects the roof, but also helps
reduce the air-conditioning requirements, cooling or heating. Protects
metal structures from rust or corrosion.Restores old weathered existing
roofs and eliminates the need for re-roofing.
Remove dirt, debris, scale, loose gravel, granule. loose coating, oil and grease. If applying over dried-out weathered asphalt, first
prime with BITUMAT BITUPRIME/BITUFAST. When coating a metal structure remove all dust, dirt and rust, by sand blasting, etching or steel wire brush, then prime with BITUMAT METALSEAL and allow the primer to cure for 2 days before coating.
Apply with roofing brush, squeegee or airless spray equipment at the recommended coverage rates. The coating should be applied with all strokes in one direction to achieve colour uniformity and optimum brilliance. the material should be
thoroughly stirred with a mechanical mixer prior to application. Best results are realized when application takes place at temperatures above 20 °C; with low relative humidity.
|
Clean with kerosene
Hands : Use a hand cleaner or kerosene followed by soap and water.
|
Metal
|
0.3
- 0.4 Kg/M2
|
|
Smooth
asphalt/asphalt roll roofing
|
0.5
- 0.7 Kg/M2
|
|
Granule/wood
@ concrete
|
0.6
- 0.8 Kg/M2
|
|
Modified
bitume
|
0.6-
08 Kg/M2
|
Complies with ASTM D2824, Type III.
20-Kg pails and 200-Kg drums.
Contains petroleum distillate; flammable; keep away from open fire, sparks or other ignition sources. Wear protective clothing, gloves and goggles.
1 . Fire
- Flammable when wet, flash point 40 °C.
2. Skin - Avoid repeated or prolonged contact; if contact occurs remove with hand cleaner that removes oil or grease; then clean with soap and water.
3. Eyes-Avoid contact, causes irritation; if
contact occurs flush with clean water.
4. Inhalation - Can cause dizziness. Remove to fresh air and if breathing difficulty persist, administer oxygen.
|
<% 
%>
